POWER TRAINING FOR THE JAVELIN
by Jeff Gorski
In all the throwing events the speed of release is the factor
that has the most influence on performance, so the main focus of
training should be geared towards its inprovement. The two main
areas that this can be achieved in are technical improvement and
physical ability improvement. There has been much discussion of
various technical aspects and how they relate to throwing; for
our purpose we will look at how technique is improved by power
development. Good throwing mechanics, regardless of which event,
is a summation of forces from the ground up- if done correctly,
the action of the legs is transfered into the hips and torso.
They, in turn, manipulate the chest and shoulders, which finally
transfer the force into the arm and thrown impliment. This force
progression also gives a good basis for where the most important
areas of power development should be focused. The main areas of
the body that will give improved results in throws if they can
produce more power are the legs and hips; stomach, back and sides
are next in importance, with the chest, shoulders and arms the
last. It's interesting to note that in our country, with the
focus on upper body throwing sports, most weight training
programs have worked the upper body as the main area for
improvement for throwing, and that has led to most throwers
working on big bench press numbers until they learn the
"ground up" progression.
There is also something of a natural break between the shot and
the other three throwsby what I call "preceived
weight"; the shot is the heaviest and is thrown with the
least opportunity to "lighten" it with momentum from
movements proir to release. While the hammer weighs the same, the
energy gained in 3 or 4 rotations prior to release make it
"lighter" and it can be thrown nearly 4 times as far as
the shot. The discus is lighter than either and gains greatly
from the the 1 1/2 to 1 ¾ rotations before release while the
javelin is lightest of all and has the most opportunity to
benefit from approach momentum. the variance from standing throw
to competitive distance thrown is another measure of how much raw
power is needed in each event: while a good shot technicial can
gain 10% over their stand vs. a full glide or spin throw,
variance between standing and full efforts in the other 3 throws
range for 25% to almost 50% gained with good throwing technique.
This should tell you something about where you should spend your
training time in developing power. For the javelin thrower the
need for "fast strength" or explosive power is at a
premium- most of the benefits for them will come from
non-traditional forms of weight and power training. The nature of
the event- to apply force over a long path in very little time-
dictates that you train to improve this ability and there is
little room for slow, heavy lifts in this type of training.
Please be aware that many excellent javelin throwers are capable
of weight room numbers in squat, clean and snatch that may rival
those of the other throwers, but that is often a result of their
training for explosiveness and jumping ability- they can apply
great force in a small ammount of time. But in the javelin big
lifting numbers don't equal long throws. In college, with a 140
kg bench and a 240 kg squat I had thrown a best of 73m once; 5
years later I didn't bench, I jump squated with 100 kg and threw
between 75 and 78m consistantly. Part of this was improved
throwing technique, but it also came from power training that
directly aided my ability to put energy into the spear.
There are a couple different areas of power for the javelinist
that need to be looked at and they are used at different times in
the training cycle. First is general athletic power that allows
improving the all round ability of the athlete to move their body
or and impliment. These are often used as early season
conditioning exercises and consist of a variety of running,
lifting, jumping and throwing over-weight impliments like shots,
med balls, javelin balls and other items. While the traditional
long distance runs have a place in general conditioning, more can
be gained from repeated 400-800m runs as well as fartlek runs,
where faster strides are included into a distance run. In fact,
200, 400 and 800m sprints/runs develop much of the type of basic
leg power that is needed to build the higher intensity training
upon. In fact, much of the training in the early season is lower
intensity, longer duration versions of the training used in
pre-competition and competitive times of the year- cross over
drills on flat ground and uphill, long sprints, throwing
exercises and jumping/bounding. This is a good rule of thumb in
deciding what exercises to do during the base training. The key
in the running/jumping/cross-overs is lower intensity over longer
distances; 50 - 100m are good . The medicine ball/javelin ball
throws are generally the heaviest weight used all year and done
from a standing or only 1-3 steps. The idea is to work against
the heavy resistance to learn how to use the body to transfer
power from the legs up; minimal movement is used to prevent
injury to the upper body from fast movement against heavy weight.
This also teaches specific flexibility for the event that is
needed when throwing at higher speed/intensity. Single arm throws
with a 1 kg ball and two hand throws with a 3-5 kg medicine ball
are good at this time. As technique becomes more natural/relaxed
the weight of the balls drops and more speed/momentum is used
(more steps) to learn how to transfer the speed into the body,
which is then used in the whole body delivery learned from the
standing throw. Lifting is lower weights and lots of stes/reps
and based on the lifts that have the highest relationship to
helping you throw farther- squats, snatches, cleans, trunk
rotations, pullovers and dumbbell flys. This training is usually
done from early fall thru early to mid-December.
The next step in the training progression, from December to early
March, is to bump up the intensity of all exercises and shorten
the duration of each exercise used. If October saw you doing
crossovers of 6 X 100m, 4 sets of 12 throws with a 2 kg ball, 6 X
100m bounding, 5 sets of 10 4 kg med balls and 5 sets of 15 reps
in the weight room January is 8 X 70m Xovers, 4 X 15 1.5 kg ball
throws, 8 X 70m bounding, 5 X 10 3 kg med ball and 5 sets of 8-10
with the weights. Additionally, more specific event exercises
come into play- resisted crossovers (either with a bungee cord or
a weight vest) , deliveries with a heavy javelin or jav ball
(about 1 kg) off a few steps, and the beginning of run up work to
make the development of the full throw a "second
nature" skill. This cannot be overlooked in training- the
ability to flow smoothly from the run up into the delivery action
without a break in momentum is a weakness in almost every
American javelin thrower and usually it is because this exercise
is overlooked. To continue with specific throwing power
development a few exercises with weights that simulate javelin
actions are included in this part of the season: these are quite
specific and should only be used with athletes with a good feel
of their throwing technique and the physical ability to execute
them correctly. These exercises are not done slowly- they imitate
the throwing action in both movements and in developing the
stretch reflex that is so vital for good throwing. They also
incorporate the whole body into the exercise- as should good
throwing technique- and help improve balance, rhythm and dynamic
action, all components of good throwing. These include plate
swings in a throwing action (Fig 1), trunk twists with a plate
(Fig 2) and a "skin the cat" snatch (Fig 3). I would
recommend that both single and double arm throws from a stand use
this "windmill" start to the throw- it helps develop
rythem like that of a running throw. You can also include
chopping wood with an axe or maul at this time, as well as
jumping over hurdles and some plyometric box jumping. The focus
on all of the hopping/jumping must be on a "quiet"
landing and an active, explosive takeoff which simulates the
action in the final steps of the throw. Hard, loud strides in the
actual throw are a series of little stops that kill the flow of
the throw- jumping with heavy ,hard landings teach you how make
this error a part of your throw- another aspect of most US
throwers. The actual work done in the weight room is higher
intensity than in the fall- reps of 6-8 and an effort to move the
bar smoothly and fairly quickly. The main exercises should be
squats, snatches, pullovers, flys and seated rows. These included
with the exercises already listed give you a great power
development potential. Power training should be done in 3-5
sessions a week, depending on the athletes ability to recover and
their experience; other training (throwing, general running and
heavy strength training) make up the rest of the weekly cycle.
In the final part of the training cycle, when you are actually
into the competitive season, the exercises discussed in the
previous phase are continued at a higher level of intensity. This
is when you want to hone the power base you've built to the
finest level possible. Intense training sessions along with
adequate rest, often overlooked as an important part in training,
are what bring the athlete to the peak of their physical and
technical ability. The weight of impliments thrown drops again-
competitive weight or just slightly over for single arm throws
and 2-3 kg for double arm (1- 1 1/2 kg for women)- and more speed
in used in performing the exercises. A lot of how the weekly
training routine is programmed is based on the competition
schedule; big meets that require long throws are designed and
trained for with more rest from hard power or throwing training
proir to the meet to allow complete recovery. In general, you
want to have 2 high level power sessions a week and allow a day
or two before a competition to heal up. If meets are on
Saturdays, then a Sunday session in the weight room after a
jumping workout and a Wednesday routine of power throws,
sprinting and simulation exercises is a good base to work from.
Technique throwing and general training take place on Mon., Tues.
and Thurs. with a light session, like a pre-meet warmup, on Fri.
The ideas put forth here have been used in some form by a number
of good throwers for many years. There are, of course, a number
of variations that can be included to meet the needs of the
particular athlete. The purpose of this article is to give you
some ideas of where the priorities in training should be and that
power is developed by many other ways besides weight lifting.
Increased levels of power are to make your throwing technique
easier and give more consistent results in competition and
training. There are no absolutes in athletics- things are various
shades of grey and you must figure out what works best for you or
your athlete in your particular situation. What I've set out is a
basic outline with some good specific exercises that will help
you find the best combination of training to get long throws .
| Fig. 1 Plate swings into "C"
position - "windmill" up to the hip
snap/shoulder stretch then drop down and repeat |
| Fig. 2 Trunk
twists with plate - drop hips and twist shoulders with
plate at arms length; thrust hips/belly up while dragging
the plate, then swing plate to opposite side |
| Fig. 3 "Skin the Cat"
Snatch- Light weight and wide grip, bring bar overhead
and continue behind and drop hips as you lower bar toward
ground; lift hips and pull bar back overhead to starting
position |